Sentence examples for differences in the device from inspiring English sources

A thermoelectric microgenerator based on a novel structure, in which the heat flowing in elements with different thermal resistances produces local temperature differences in the device, has been designed, fabricated in BESOI technology and experimentally characterized.

It is further demonstrated that small topological differences in the device architecture can have a profound impact on both the stability and the efficiency of the devices.

Thus, at least in this case, analogous states can be found despite significant geometric differences in the devices, with the 60 cm device requiring a larger Ro, and thus faster relative inner rotation, which intuitively might be thought of as being necessary to overcome the effect of the large shaft rotating with the outer sphere (Zimmerman 2010).

The differences in the outcomes of recent trials of HFOV may be largely due to differences in the devices used.

The site's commenters have created a cult of personality and feel empowered by Notion Ink to actually make a difference in the device.

The major difference in the device structures of the two types of DSSCs was the bottom contact between the nanowire array and the FTO-coated substrate, and this increase in the series resistance could be mainly attributed to the less-than-ideal bottom contact in the DSSCs fabricated using transferred nanowires.

However, this may be attributed to differences in the input device used (a head-tracker for HMD group vs. a keyboard touchpad or a gamepad in the DT group).

As a result of the calibration phase, we were able to substantially reduce the force measure discrepancy between the two methods and validate the fast stenting method by assessing the differences in the final device configurations.

A range of vascular plugs are available to suit the desired vessel characteristics; however, the operator must be aware of the differences in these devices in order to choose appropriately.

The comparison of the killing performance in two industrial gas liquid solid stirred reactors, one being a scaled-up version of the other, but with noticeable differences in the mixing devices, has been made using CFD simulations.

The mean peak pressures were of a lower range in the current study compared to those reported by Bowles and Steele [5] (current study 5.7 to 10.6 versus 11.7 to 14.9 kPa) [5], which is likely to be attributed to differences in the measurement devices (current study: one 10 mm2 sensor versus ten 1 cm2 sensors positioned in parallel) [5].