Sentence examples for difference of the maximum-minimum from inspiring English sources

The mean difference of the maximum-minimum HR was calculated.

In particular, we can directly obtain the difference of the maximum and minimum ranks of (B^{ i,ldots,j }A^{ i,ldots,j }), called the spreads of the ranks of the products (B^{ i,ldots,j }A^{ i,ldots,j }) and their rank invariance.

The fluorescence signal was measured as the difference of the maximum and minimum intensity within a defined region of interest (ROI) around each cell.

The daily variation of temperature (DVT) for a given day was computed as the difference of the maximum (Tmax) and minimum (Tmin) recorded values.

The data were clustered on the signal values between 20 and 20,000 with the maximum/minimum ratio of at least 3.0 and the maximum – minimum difference of at least 100.

Then, the matrix is scaled by dividing the difference of column elements and the column minimum value by the difference of the column maximum and minimum value as shown in (1) (where i is the row index and j is the column index).

9) 42.0 0.5 0.2 0.4 Average (2002 2006) 228.3 7.7 31.9 224.7 7.4 31.0 3.6 0.3 0.9 aSimulated daily discharge in Case 1 bSimulated daily discharge in Case 2. According to Table 9, the differences of simulated maximum, minimum, and average daily discharges between the two cases range from 0.5 to 7.2, 0.2 to 0.6 and 0.4 to 1.1 m3/s, respectively.

Using Min and Max functions in the model of ArcGIS Spatial Analyst, the slope height was obtained from the difference of the minimum and maximum elevation.

Figure 9 shows a change of difference between the maximum and minimum stresses in the wellbore direction at different fracture spacing.

Open image in new window Fig. 9 Change of difference between the maximum and minimum horizontal stresses in the wellbore direction at different fracture spacing.

The Mohr Coulomb yield criterion is as follows: s + sigma_{text{m}} sin phi - ccos phi = 0, (2)where ( s = (sigma_{1} - sigma_{3} )/2 ) is half of the difference of maximum and minimum principal stresses, kPa; ( sigma_{text{m}} = (sigma_{1} + sigma_{3} )/2 ) is the average value of maximum and minimum principal stresses, kPa; c is cohesion, kPa; and ϕ is the internal friction angle, °.