Sentence examples for difference in gauge from inspiring English sources

Peter Stanners, an Anderson owner himself, warned: "You need to be aware of the difference in gauge (thickness) between an original Anderson shelter and modern corrugated iron if you are considering covering it with soil as 40cm of wet soil will be very heavy.

"Immersion" was defined as the difference in gauge readings between no load and each loading phase.

Most of the South's railroads were local, ramshackle affairs that did not cross state boundaries; co-ordinating the system was made more difficult by differences in gauge.

In addition, the differences in gauge width measured along a single trackway allow estimation of abduction angles for the limb.

Apart from the state incumbents' lack of clarity about fees for access to their tracks, these include different safety rules, signalling systems and voltage (and the need to switch to diesel on non-electrified tracks), and differences in gauges.

The error of the stress equation occurring due to the difference in the gauge portion profile was compensated for by using the forced vibration factor (C1) and the gauge shape factor (C2).

However there are no reports on differences in 20 gauge and 25 gauge sclerotomies using ultrasound biomicroscopy (UBM).

Using the gauge difference in reading, it was possible to get a new gauge calibration between the original gauge and the back-up gauge, which will solve the problem partially.

In Fig. 11a and b, the changes in gradients became larger than that shown in Fig. 5 because the difference in stiffness between the strain gauge and the steel plate is small, and the strain gauge became easy to deform.

Although the change in strain based on temperature can also be modified by changing the thickness of the steel plate, the large difference in stiffness between the strain gauge and the SMP would affect the measurement accuracy.

One reason other than the stiffness of the embedded heating wire described in "First prototype" section is that the difference in stiffness between the strain gauge and the SMP in the rubbery state is too large to transmit the deformation from the SMP to the strain gauge.