Sentence examples for dielectric plate from inspiring English sources

A lossy dielectric plate is inserted in the high-angle sky spectrum observation to equalize the continuum levels of the high- and low-angle sky spectra.

We found that fields computed under corrugated dielectric plate are more intense and spread uniformly all over the plasma dielectric interface.

Also, we experimentally evaluated that the fc could be shifted to 340 MHz using the dielectric plate, the pass-band ripple could be decreased by ripple trimming using the dielectric rods, and the BW could be increased 31 MHz by BW trimming using the Cu rods.

The experiment is done to investigate dc-voltage effect to the coupling ratio by designing fusion region of fabricated 1X2 SMF-28e® couplers between two dielectric plates.

This approach enables to design a comparatively simple and reliable capacitance testing hardware and software for unilateral measurement of the thickness of dielectric plates, shells and layers with compensation of its dielectric properties.

It operates mainly through the acquisition and analysis of the echo signal to carry information to detect objects hidden in penetrating media, such as clay walls, dielectric plates, concrete, etc.

This article is devoted to presenting results of FDTD (finite difference time domain) simulation of surface waves excited in planar overdense plasmas, with the emphasis on the effect of the corrugated dielectric-plate surface on the excited wave field profile.

We developed a tuning mechanism of HTS filter with a dielectric tuning plate, dielectric trimming rods, and conducting trimming rods.

These filters are generally tuned by adjusting the gap between a dielectric floating plate above the filter.

The measurements have revealed high homogeneity in composition and poled properties both within individual plates and in between plates, with the Curie temperature Tc= 162 165 °C±2 °C within plates), free dielectric constant KT= 7200±6%⩽±10%0% within plates), dielectric loss (tan δ)<0.013 and the thickness-mode electromechanical coupling factor kt=0.53±2.5%⩽±3.0%0% within plates).

The insertion of a dielectric between the plates of a parallel-plate capacitor always increases its capacitance, or ability to store opposite charges on each plate, compared with the ability when the plates are separated by a vacuum.