Sentence examples for diameter of cylinder from inspiring English sources
The diameter of cylinder, D, was 40 mm, and the diameter of rod, d, ranged from 1 to 10 mm.
In the present study, a FSP of different length (0.5 ≤ L/D ≤ 2.5) (where L is the length of splitter plates, D is the external diameter of cylinder) was proposed to control the vortex induced vibration (VIV).
Taking the cylindrical volume whose height is equal to the tooth width as the volume of the gear teeth, the hypothetical diameter of cylinder is considered as the average diameter of outside circle diameter and inside circle diameter.
Set D as the outer diameter of cylinder, d as the inner diameter of cylinder, Hc as the height of cylinder, Ht as the height of teeth, θ as the span of teeth, N as the number of teeth.
Moreover, it was found that the diameter of cylinders increases with the casting temperature.
With a constant volume, the diameter of cylinder- and right circular cone-shaped Si3N4 SWS and the edge length of square pyramid are 130 nm, the heights (h) of the etched part of Si3N4 SWS are 200, 600, and 471.3 nm, the height (s) of the non-etched part is 70 nm, and the base (W) of a unit cell is 200 nm [4].
Flow at Reynolds number (Re) of 1.4×105 (based on freestream velocity U and the diameter of the cylinder D) over a cylinder with axial lengths of 10D, 20D and 30D was simulated.
The geometrical and mechanical characteristics of the cylindrical vessel are summarized in Tables 1 and 2. Table 1 Geometrical properties of the cylindrical vessel External diameter of the cylinder, m 4 Thickness of the cylinder walls, m 0.012 Height of the r.c.
There are two dimensionless parameters in this study: the Reynolds number based on the free-stream fluid velocity and the diameter of the cylinder, and the ratio of the permeability of the cylinder to the square of the cylinder diameter.
For 200⩽Re⩽300 obtained periodical 3D flows are corresponding to known mode A (with periodical structures along the axis of a cylinder equal to 3.5d⩽λ⩽4d, where d is the diameter of the cylinder).
