Sentence examples for diameter based on the from inspiring English sources

In design #3, all the perforation diameters are assumed identical and use only one parameter to determine the optimal perforation diameter based on the minimization of ΔT and ΔP.

Design Expert software (version 7, Stat-Ease, Inc., Minneapolis, MN 55413) was used for evaluation of the fibers' diameter based on the affected nanofibers variables.

Here we propose and test a criterion for the design of a tool shoulder diameter based on the principle of maximum utilization of supplied torque for traction.

Parametric analyses of key design and operating parameters show that there is a preferred tube diameter based on the competing influence of system-level energy storage utilization, exergetic efficiency, and cost.

As the density of our nanoholes was about 3/μm2, the area illuminated by the detection light was 5 mm in diameter, based on the size/shape of the nanohole and streptavidin (SA) [7], there were about 218 SA around each nanohole; therefore, the effective number of streptavidin under detection for a sample was estimated to be 1.28 × 1010, i.e., 21.3 fMol/sample.

The design of compound parabolic concentrators for solar photocatalytic applications is described in detail and 25 50 mm is proposed as the optimum photoreactor diameter, based on the optical characteristics and optimum concentration of the two photocatalytic systems (TiO2 and photo-Fenton) that can be used with sunlight for wastewater treatment.

In design #2, four design variables are considered to determine the optimal perforation diameters based on the minimization of ΔT and ΔP.

We show that the measurement is sufficiently accurate to reveal significant differences between the measured and the calculated wall diameters based on the ideal hexagonal structure of graphene and the C C bond length of 1.421 Å.

Principal component analysis (PCA), one of the popular chemometrics, was then used for comprehensive and systematic assessment on PMC samples collected from different regions with different diameters, based on the variables including the contents of the three quantified analytes and the PA/W (peak area divided by sample weight) values of the four unquantified ones.

We developed two regression equations to estimate body mass from these diameters based on the masses of modern human samples.

According to eligibility criteria in the protocol (Table I), FFR should be measured in all coronary arteries with one or more stenoses ≥30% of the reference vessel diameter based on visual assessment of the angiogram, with normal coronary blood flow (TIMI grade III) and in the opinion of the attending cardiologist FFR measurement will be feasible and may have diagnostic value.