Sentence examples for device resistance from inspiring English sources

To understand the difference between the filament and interface types of resistive switching, the area dependence of the RRAM device resistance could be examined.

Additionally, spray duration and shot weight for pMDIs and device resistance for DPI were measured.

For READ, a low voltage is applied between the top and bottom electrodes to sense the device resistance.

From these studies, selected prototypes were observed to have improved aerosolization performance without significant increases in device resistance.

The device resistance of the DPIs decreased with increasing altitude and was successfully modeled as a function of ambient pressure.

Thus, >40 Gb/s transmission is possible in case if the device resistance is further reduced, and an optimized heat dissipating VCSEL design [45] is provided.

Figure 5d f shows the device resistances in both air and N2.

TEGs cannot be operated at full capacity without additional electronic equipments, since the internal resistances of TEGs are not equal to the device resistances connected across TEGs.

Further considering an optimized intermediate layer and device resistances, the optimally matched photocurrent approximately 12.74 mA/cm2 is achieved with a light-conversion efficiency predicted to be 12.67%, exhibiting an enhancement of over 27.72% compared to conventional planar configuration.

The range of culture device resistances is 37% of the mean value.

In multimicrobial biofilms containing Candida albicans and S. aureus, such as that occurring on the surface of indwelling medical devices, resistance of S. aureus to vancomycin is higher in the polymicrobial biofilm.