Sentence examples for device corresponding to from inspiring English sources

Three different versions of the device, corresponding to domestic, agricultural and light equipment needs, respectively, are worked out using a rationnal method of dimensioning.

Photovoltaic (PV) module emulators, which can provide reproducible and controllable input power profile for a load device corresponding to different ambient conditions for a PV module, can significantly reduce the level of effort and cost for the development and optimization of the PV module, load devices, as well as interfacing power converters.

The solution-processed electrophosphorescent organic light-emitting diodes doped with these platinum-based phosphors have been fabricated which showed a maximum external quantum efficiency of 2.77% for the best device, corresponding to a power efficiency of 3.48 lm/W and a luminance efficiency of 8.49 cd/A.

The histogram of the Y-SnO2 NB device corresponding to 100 ppm of different gases at 210 °C (b).

The histogram of the Y-SnO2 NB device corresponding to 100 ppm of different gases at 210 °C is shown in Fig. 7b.

Device package is a program collection which is responsible for network device corresponding to the real world, whose main capability is to facilitate the definition and implementation of the network devices.

We evaluated the contact resistance for the devices corresponding to each contact deposition rate using the gated transmission line method (gated TLM), based on Equation (1), and the results are displayed in Fig. 2b.

These are primitive devices corresponding to the lowest levels of humour; more sophisticated are the techniques employed by Maurice Ravel in La Valse, a parody of the sentimental Viennese waltz, or by Zoltán Kodály in the mock-heroics of his Hungarian folk opera, Háry János.

Especially, during the analysis an unexpected performance of the device is discovered, in which the signal of the devices corresponding to 1530 nm changes into pulse signal with slop of 2.292%/nm, i.e. 0.36 dB/nm when the air gap is reduced to 300 nm, indicating sensitivity over four times higher than that of the original one, namely 0.5%/nm, i.e. 0.04 dB/nm.

Before actually cleaving, massive simulations for the design of the second-order buried grating was implemented with finite element method software (COMSOL), which was similar to Ref. [16] After thinning to 150 μm, the waveguide was cleaved to 0.5- and 1-mm-long 1-mm-long 1-mm-longing to coupling strength of 0.54 ~ 1.77 andevices~ 3.55, respecorresponding

Contemporary researchers are working on microelectromechanical filters, the mechanical devices corresponding to electronic integrated circuits.