Sentence examples for development of specimen from inspiring English sources

The aim of this study is the development of specimen geometries able to isolate the plane strain state at a controlled level.

For example, the development of specimen holders that are more stable and allow collecting data at slower exposure rates with "resting" periods in between exposures might make biological specimens more impervious to radiation damage (Chen et al. 2008; Karuppasamy et al. 2011).

However, the failure mode is not the shear failure in the equivalent shear zone; the experimental data still can be used to investigate the shear crack development of the specimen of 6H70. Figure 8 shows the crack development and failure in the right side of the specimen of 6H70, respectively.

By analyzing the loading, deflection, strain and fracture development of the specimen in the process, studying the mechanical characteristics and failure pattern of such components.

The result is a sequence of photorealistic artificial images that show the development of the specimen within the interval between observations.

Based on the crack development of each specimen, the average ratio of the residual total shear crack widths to the residual maximum shear crack width for the HSRC beam specimens is approximately 4.5.

(1) Shear failure Taking the specimens of 175R70, 200R70, 275R70 and 325R70 for examples (Figs. 3 and 4; cracking point, maximum strength point and degradation point in Fig. 3 are recorded in the experiment), the crack development of each specimen is described as follows.

Results indicate that the addition of 12.5% maple-wood sawdust (by dry mass of binder) improves the strength development of CPB specimens at later hydration age (91 curing days).

Open image in new window Fig. 4 Crack development of the specimens (175R70, 200R70, 275R70 and 325R70).

We present a new method for modeling the development of settled specimens with filamentous growth patterns, such as fungi and oomycetes.

It contributes to the refinement of pores structure via the increasing geopolymer gel growth, as observed in the consistent compressive strength development of ambient-cured specimen to the oven-cured specimen.