Sentence examples for detonation jet from inspiring English sources

Though the thrust data from the impulse thrust measurement system is a litter lower than that from the force transducer due to the axial momentum losses of the detonation jet, the impulse thrust measurement method is valid when applied to measure the averaged thrust of PDE.

During machining process, its energy exports with the micro-detonation plasma jet.

In this paper, spectroscopic diagnostics is performed to analyze the internal physical state of the micro-detonation plasma jet and an experimental test is employed to study the effect of plasma jet on the silicon nitride ceramics.

After the detonation, the metal jet was gradually produced under the effect of the detonation wave.

Upon missile detonation, the jumbo jet began to experience oscillations (yawing) as the dual channel yaw damper was damaged.

The results confirm previous findings that jet initiation of detonation can occur at initial conditions where an established detonation would fail to transit into the unconfined volume.

A Smooth Particle Hydrodynamic (SPH) method based on mesh-free Lagrange formulation is applied to simulate an entire process of a shaped-charge detonation, formation of a metal jet as well as penetration on a steel plate.

However, when spark and hot jet ignition methods were used, detonation initiation time decreased at the increased operating frequency and the deviation error of detonation initiation time was much higher.

The deflagration-to-detonation transition distance measured using the hot jet initiation method was 1130 mm, a reduction of approximately 150 mm compared to the baseline spark ignition method.

In this paper, the entire process of HE detonation and explosion, explosion-driven metal deformation and jet formation as well as the penetrating effects is modeled using a smoothed particle hydrodynamics (SPH) method.

As the length of jet pipe decreased to 100 mm, the detonation frequency increased to 35 Hz.