Sentence examples for determined limit from inspiring English sources

The following statistical characteristics were determined: limit of detection 0.8 mg/kg, limit of quantification 2.6 mg/kg, standard deviation of repeatability = 0.4 mg/kg, relative standard deviation of repeatability (coefficient of variation) 15%, correlation coeffizient 0.97, recovery 103%.

Unlike the C-terminally mCherry tagged proteins which have the potential to be processed as type-II membrane proteins, the C-terminal tail lengths of mCherry-CaBP7-myc and mCh-CaBP8-myc (20 residues) are within the aforementioned experimentally determined limit required for processing as TA proteins.

Comparison of the experimentally determined limit of 1.7 ms with the half-transfer times calculated using Dutton's model suggests that neither the ε → ∞ nor the ε = 20 profiles shown in Figure 7 are able to support fast enough electron transfer.

To calculate LD between all pairs of SNPs within this limit, we started with the lowest frequency bin, whose rounded frequency is p b, and calculated correlations between all SNPs in the focal bin and those SNPs with MAF below the empirically determined limit pb + 0.005 < MAF < 0.01 + 1.875 pb − 1.17 pb).

With a determined limit of detection of 5.9×10−3 µg g−1 hydrogen the developed instrument is able to determine extremely low hydrogen amounts even at very low hydrogen desorption rates.

Considering Fig. 17 it can be seen that in s/d ratio which equals 2, swelling value of the soil is more than s/d ratio which equals 3 or 4. It can be concluded that implementation of stone columns group until distance of columns are less than a determined limit, swelling value of the soil is increased.

The most bedeviling question for writers, I think, is whether any of us can turn our unconscious and conscious desires and our historically and psychologically determined limits, our necessities, into virtues, and whether our vices can become our books' virtues".

The calibration factor for 81mKr in the radionuclide calibrator with this geometry was independent of the gas flow rate within determined limits.

Furthermore, the enantiomeric purity of the product was not determined, limiting the applicability of this cumbersome synthesis route.

Linear stability analysis is conducted and a harmonic balance method is applied to determine limit cycle amplitudes and bifurcation diagrams.

According to [26], it is necessary to determine limits for the area dedicated to energy cropping in order to minimize land use conflicts.