Sentence examples for determination of air from inspiring English sources

Traditionally, the determination of air volume flow rate is achieved by using a vane anemometer or smoke tube in conjunction with an area measurement.

Fast neutron dose attenuation from a 252Cf neutron source is used for the determination of air to water ratio in pipes.

Simple analytical volume flow calculation allows the determination of air change rates for various window opening configurations and types under static conditions.

The experiments involved microscopic determination of air content and spacing factors as well as compressive strength tests for all the concrete samples.

The measurement techniques associated with this approach are also presented, with special attention paid to the determination of air flows and climate patterns using advanced flow measurement techniques such as particle imagery visualisation (PIV) and sonic anemometry.

To simulate a wide range of human respiratory intensities associated with different levels of physical activities that must be recognized in the determination of air pollution standards, the CO2 concentrations within animal inhalation exposure chambers may be controlled.

Furthermore, the following measurements and samplings were conducted in 25 selected sites within 10 km around the power plants: soil sampling for the determination of the above radionuclides, radon concentration and exhalation rate measurements, soil gas radon concentration measurements, dose measurements and calculations, determination of air-particulate matter concentration, etc.

A field trial at a hazardous waste dump near Bitterfeld, Germany, for up to 21 days combined with periodical determinations of air concentrations using low-volume sampling indicated that the new samplers can in principle be used in the field, although the sampling rates derived from the field results differed considerably from the laboratory findings.

In order to measure the CO2 levels indoors/outdoors of each museum for the determination of the air exchange rate, the IAQ instrument (Indoor Air Quality Meter, Model 8762, TSI) was used which measures the CO2 level in parts per million (ppm).

Experiments on industrial tempering line with specific set-up allow the determination of the air flow in the hole and then of the forced convection coefficients.

3) Determination of Indoor Air Temperature.