Sentence examples for depth rods from inspiring English sources

They then used string and depth rods to measure down from the water level to strategic points on the site.

In block-type high temperature gas-cooled reactors (HTGRs), insertion depth of control rods (CRs) into a core should be retained shallow to keep fuel temperature below 1495 °C through a burnup period, and hence excess reactivity should be reduced through a different method.

The side-flow pump is presented for increasing the setting depth of sucker rod pumping system, which adopts a special structure of side-flow valve, ladder-type solid plunger and breathing hole.

In order to limit reactivity excursions and to ensure safe shutdown the excess reactivity and thus the insertion depth of the control rods at normal operating conditions has to be managed.

The distance of the maximum step voltage from the ground rod increases with the depth of the buried ground rod.

Charles Siebenthal, a senior engineer at the Electric Power Research Institute EPRIin in California, describes a test in an American nuclear-power station: the device that controlled the depth of the fuel rod in the core began to oscillate because the air-conditioning system in the control room failed and the temperature rose.

At present, the limit depth of electric heating rod is about 2,000 m.

The position of the maximum step voltage varies with the buried depth of a ground rod with the insulation lead.

With the complex geological conditions and bad fluid properties, the working fluid level is very low and rapidly dropping to the limit depth of conventional sucker rod pumping system.

The simultaneous quantitative prediction of three target properties (tensile stress, surface hardness and case depth) in medium carbon steel rods based on magnetic nondestructive testing techniques was experimentally investigated.

In ascending order of penetration depth the ranking was the 10.6 mm unitary rod, segmented rod, telescopic rod and 6.5 mm unitary rod.