Sentence examples for depth of the grid from inspiring English sources

In the simulation, the burial depth of the grid into the soil with and without rods was considered to be 0.5 m to find the ground related parameters.

Through trial and error, the depth of the grid was found to increase from 10 to 40 km with an interval of 5 km, and the number of Poisson wavelets in the computational domain changed from 400 to 2000 with an increment of 400.

Our back-projection analysis does not have very good depth resolution, so that the assumed depths of the grid points do not significantly affect the results.

The depth of the extended grid in each direction varies depending on the position of the source.

The initial 1-D velocity model used in the present study (Fig. 2) was obtained by resampling the 1-D velocity model calculated by the joint hypocenter determination (JHD) technique (Kissling et al., 1994) at the depths of the vertical grid nodes.

With this as the goal, the depth of optimum grid burial is determined.

These two thermal conductivities are at laboratory temperature and have been corrected for temperature at depth across the grid using the algorithm of Vosteen and Schellschmidt (2003).

Similarly, when calculating the time of settlement hazard onset, if the time cannot be detected for some grid cells due to a shallow soil layer depth of the climate model, these grid cells were removed.

To estimate W at each time-grid, we first select location of the energy release from the employed 13 source-grids (red circles in Fig. 1), where depth of each grid is set to be 10 km considering the distribution of the aftershocks.

Either of the depth values is usually represented as Mean Depth (MD), the average of all depths from one grid cell to the rest of the grid.

If at least 2 terminals were located within a 100 × 100 μm square of the grid, at any depth within the section, a marker was placed in the center of the square.