Sentence examples for depth of the cutting from inspiring English sources

The remedy lies in extending the alignment somewhat thus reducing the depth of the cutting.

The penetration depth of the cutting needle in the lesion and thus the length of the biopsy cylinder could be varied.

Subordinate risk factors could include an acute angle of the needle to the tumor surface, frequency of biopsy samples, penetration depth of the cutting needle, and basal position of the lesion.

Increasing the penetration depth of the cutting needle system increases the length of the incision to extract a longer biopsy cylinder and a correspondingly longer section of tissue is injured.

When the jet pressure and cutting depth are 40 MPa and 12 mm, respectively, the percentage cutting force reduction was 22.6%, the depth of the cutting slot increased by 24.2%, and the volume of rock breakage increased by 29.3%.

Predictions of A-weighted excess attenuation for a traffic noise spectrum are made illustrating the effects of varying the depth of the cutting and the absorbency of the surrounding ground surface.

The tests are performed at several feed rates (f) while the axial depth of the cut and cutting speed remain constant in dry cutting conditions.

The cutting forces increase as the feed rate and depth of the cut increases, but cutting speeds' effect on cutting forces has not been observed for symmetric face milling.

This work includes input parameters like cutting conditions, cutting speed, feed and depth of cut as cutting factors and the responses of tool flank wear, surface roughness, cutting force and cutting temperature have been optimized by grey relational analysis.

The effect of machining parameters such as cutting speed, feed rate and depth of cut on the cutting force and surface roughness of the composites were investigated during the dry turning operations.

The influences of the axial depth of cut on the cutting force and the fluctuation are studied based on the proposed index.