Sentence examples for depth of the coat from inspiring English sources

The depth of the coat can reach up to 2 inches.

However, GI coatings for the steels with both flash coatings consist of alloy phases up to a certain depth of the coating near steel interface.

The presence of pure zinc phase was confirmed almost entire depth of the coating when GI coating was formed on HS steel substrate without any prior metallic coating whereas the presence of alloy phase was confirmed up to some depth of the coating when GI coating was obtained on HS steel surface with prior Ni coating.

SEM-EDS and XRD analysis reveal that galvanized iron (GI) coating for the steel without any flash coating consists of almost pure zinc throughout the depth of the coating.

Photographs of the LIGO Gravitational Wave detector mirrors illuminated by the standing beam were analyzed with an astronomical software tool designed to identify stars within images, which extracted hundreds of thousands of point-like scatterers uniformly distributed across the mirror surface, likely distributed through the depth of the coating layers.

At production speeds (50 m/min and higher) there is a natura frequency of this fluid ribbing effect which is independent of the type of coater and fluid rheology, and depends only on the depth of the wet coat of transferred liquid.

The second part of this paper reports on the effects of curing temperature and exposure time of the sealants on the penetration depth of the ceramic coating.

The ratio of the critical penetration depth to the coating thickness is approximately 0.2 for both diamond-like-carbon (DLC) and alumina coatings and almost independent of the coating thickness.

The ratio of the critical penetration depth to the coating thickness depends on the coating types, but not on the coating thickness.

Microhardness along the depth direction of the coating was measured using a Vickers hardness tester.

GDOES sputtering was used for elemental depth profiling of the coating.