Sentence examples for depth of displacement from inspiring English sources

The limits on resolution and penetration depth of displacement measurements in OCE are set by OCT, the underlying imaging modality and, thus, lie in the range 1-20 μm and 1-3 mm, respectively.

Based on the simulation, three different geometric features, i.e. maximum deformation angle, maximum deformation depth and width of displacement constraint of the reconstructed shape of the deformed body are extracted.

Now I look back, I know the key to my first response was not the truth of his representation but the depth of my own displacement.

At the plane B-B, as shown in Fig. 5a, c, and e, in which the UCT of the tool edge is equal to the depth of cut, the displacement vectors of workpiece atoms abruptly change at a boundary.

The results indicate that, Under the condition of soil-rock compound stratum in Xiamen city, when the steel pipe pile location away from the edge of deep foundation pit 2h (h: depth of deep excavation), the displacement of the steel pipe pile was generally small.

It is shown that (1) vertical displacement depth of isentropic surfaces in the upper middle atmosphere becomes of the order of several km because of the exponential growth of the amplitudes of IGWs with height, and (2) irreversible vertical displacement of the order of several km occurred due to mixing when the IGWs break down.

As the depth of excavation increases the displacement of soil nail wall too increases.

Also, the effect of applying an axial load of 298 kN to the pile on the produced bending moment and lateral displacement along the depth of the pile due to the applied displacement of 2 cm at the top of the pile is minimal and can be neglected.

A comparison was conducted between LPILE, Abaqus/Cae, and SAP2000 to study the effect of applying an axial load of 298 kN to the pile on the produced bending moment and lateral displacement along the depth of the pile due to the applied displacement of 2 cm at the top of the pile.

Also, the effect of applying an axial load of 300 kN, to the pile on the produced bending moment and lateral displacement along the depth of the pile due to the applied displacement of 2 cm at the top of the pile, is negligible.

However, in the present case, wear is expressed in terms of displacement or wear depth.