Sentence examples for deposits calculated from inspiring English sources

The composition of the deposits calculated from MNN transitions showed that the surface is enriched in Pt.

The surface roughness of the Nb deposits, calculated from their double layer capacity, is low and constant at low θ, significantly increases at θ = 45°, goes through a maximum in the range 60 75° and drops at θ = 90°.

The amounts of coke deposit calculated from TG curves are listed in Table 3.

Annual and masses in kg/ha were calculated for snow deposited on UFG from 1951 through 1993 (figure 5). Figure 5 Nitrate (A) and sulfate (B) annual wet deposition at NADP/NTN sites WY06 and WY98 and total deposition calculated from ice core DH-98-4 compared to total U.S. emissions of NO x (A) and SO 2 (B) from 1950 to 1998 [46].

The average recurrence interval of tsunami deposits is calculated to be 350 390 years using the modeled date of the E11 deposits in Model B and the number of identified events at the trench site.

The five independent elastic constants of plasma spray deposits were calculated from constitutive equations and microstructural information (void aspect ratios and porosity) was gained from stereological analysis.

The reference K0 values in the soil deposits were calculated by the Mayne and Kulhawy's formula based on the friction angles and overconsolidation ratios (OCR) determined from laboratory tests.

The composition of Ni Cu alloy deposits is calculated by Vegard's law from XRD data lattice constants, which shows a good correlation with those obtained from the EDX analysis.

Moore et al. (2014) demonstrated geomorphologically and stratigraphically that these bays migrate through their own lacustrine deposits and calculated the migration rate from a series of OSL dates.

For the two cases, the volume and mass of the fallout deposits were calculated using three methods: (a) integrating multiple exponential segments on a log(mass per unit area) versus log area) plot (e.g., Froggatt 1982), (b) power-law fitting on log(thickness) versus square root of area plot (Bonadonna and Houghton 2005), and (c) Weibull fitting (Bonadonna and Costa 2012).

The microstructural evolution in the deposit was calculated with equilibrium thermodynamic calculations.