Sentence examples for deposition mass from inspiring English sources

At 4,000 m ASL, the UFG ice-coring site is subject to wind erosion of previously deposited snow and the corresponding deposition mass.

The analysis of these various stages allows the net deposition mass flux to be estimated and gives the kinetic of the deposit growth.

Since the size of the Pd NPs does not change significantly with the deposition mass, the dependence of LSSV on the deposition mass can be attributed to the difference in the nanoparticle coverage.

The results indicate that the deposition mass and collection efficiency achieve a minimum at the probe surface temperature of 560°C.

The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer, and wall film thickness and velocity distribution are discussed.

An increase in deposition mass per surface area was always observed when increasing polarization time, acetic acid bath showing the highest rates and yields and dried coating thickness up to 130 μm.

During the time period of overlapping deposition data from both UFG and NADP/NTN sites, there is only one year where similar deposition masses occur (1986).

During the time period of overlapping data there is some general agreement between UFG and NADP/NTN annual deposition masses (i.e. 1985, 1988, 1992 , 1993 and 1994).

Dissolved (0.45 μm) and concentrations from the 1998 ice-core samples (site DH-98-4) were used in combination with the average ice-core density value of 0.90 g/cm3 (n = 12) to calculate deposition masses in kilograms/hectare (kg/ha).

In most electrochemical processes as in continuous electro-deposition, mass transfer is governed by the near-wall hydrodynamics of the bath.

For dry deposition, a mass median diameter of 0.1 μm with a fine mass fraction of 0.93 is used, based on the recommended values for polycyclic organic compounds from Appendix B of the report on Deposition Parameterizations for the Industrial Source Complex (ISC3) Model [ 22].