Sentence examples for deposition in order to from inspiring English sources
Secondly, a 200-nm n-type ZnS thin film was deposited on the prepared p-type Si by chemical bath deposition in order to form a ZnS/p-Si heterojunction.
This forces breeders to control lipid deposition in order to maintain appropriate end-product quality.
A 500 Oe external magnetic field was applied during deposition in order to induce in-plane uniaxial anisotropy.
The substrate was cleaned with modified RCA cleaning using ethanol, acetone, and DI water prior to the deposition in order to remove a native oxide layer.
The Al2O3 powder was heated to 900°C for 2 h before deposition in order to improve its dielectric properties [15].
High-quality optical glasses were used as the source materials for sample deposition in order to avoid the contamination in the volume of the films.
The obtained substrates were characterized by RAS spectroscopy after drying to define the presence of polluting species. 1 μL of 10−4 M AO7 solution was deposited both on the naked gold coated slide and over the different types of colloidal depositions, in order to compare the spectra and to verify the presence of surface enhancement effects.
The optimum synthesis conditions for obtaining such multisegmented nanowires were established by carefully studying the electroplating of homogeneous Co-Ni alloy nanowire arrays grown at several electrochemical deposition potentials in order to determine the deposition rate and chemical composition of the deposits grown at each electrodeposition potential.
Previous models explaining fluidized bed chemical vapor deposition have been reviewed and compared with recently developed deposition theories in order to establish a better description of the deposition process.
MAPLE (Fig. 3) is a deposition technique [28] derived from pulsed laser deposition (PLD) in order to avoid laser radiation-induced damage to biologic or organic molecules or compounds.
A thin gold metal layer was deposited on a glass substrate with a low deposition rate in order to enhance the uniformity over a large surface.
