Sentence examples for deposition gas from inspiring English sources

Rapid deposition, gas generation in the source rocks and thermal expansion of pore-fluids caused over-pressuring in the Miocene shales in the center of the depression.

In reactive arc deposition, gas flow control must be established and controlled in much the same way as for reactive sputter deposition.

The effect of dynamic factors (e.g., sulfur deposition, gas Non-Darcy flow, irreducible water saturation, and residual gas saturation) on GWWBT was involved in this model.

The Raman shift of the D peak remained stationary as the compressive σc in the films increased but changed when the deposition gas was varied.

We present in this study spectroscopic investigations of amorphous carbon nitride thin films (a-CNx) deposited on Si substrate by radio-frequency magnetron sputtering of a graphite target in Ar/N2 gas mixture, under different deposition gas pressure.

Glass substrates with metal microelectrodes and sputtered catalysts are heated by a pulsed current in a chemical vapour deposition gas environment for 0.5 1 s to synthesize CNTs of several micrometres in height without damaging the glass substrate.

AQPMS consists of advection, diffusion, dry and wet deposition, gas-phase chemistry and the liquid-phase chemistry.

High-quality double-walled carbon nanotubes (DWCNTs) thin-films have been fabricated in one-step by the catalytic chemical vapor deposition gas-flow reaction process with acetone as a carbon source in an argon flow.

Hexamethyldisiloxane (HMDSO) in mixture with oxygen (O2) are used as deposition gases.

Nanomaterials of yttrium oxide doped with rare earth elements have been prepared by flame spray pyrolysis (Eu Y2O3), thermal decomposition of a polymeric resin, atomic layer deposition, gas-phase condensation, flux, combustion, solvothermal and hydrothermal methods, alkalide reduction, solution-based sol gel processes, emulsion techniques, precipitation, and electrochemical methods.

Using the extensive emissions inventory in California, the model calculations track the mass and number concentrations of the PM constituents in particle diameters ranging from 0.01 to 10 μm through calculations that describe emissions, transport, diffusion, deposition, coagulation, gas- and particle-phase chemistry, and gas-to-particle conversion (Hu et al. 2014b).