Your English writing platform
Discover LudwigSuggestions(1)
Exact(1)
We note, however, that for a given metal, the required deposition rate can change depending on the vacuum conditions (i.e., the amount of residual gases).
Similar(59)
That is because ISIL cannot be defeated from the air alone, as even supporters of air strikes acknowledge, and because ISIL's success depends on the vacuum created from a multi-sided civil war.
The composition of the hydrolyzate depends on the vacuum evaporation process variables (pH, temperature, xylose concentration degree and treatment with activated charcoal before or after the process).
The divergence angle of the field lines yielding a maximum of ion charge depends on the vacuum arc parameters and usually is in the order of 2 5°.
The infant typically displays a higher suck cycle rate (74 sucks/min during nutritive sucking [ 19]) compared to the cycle rate of the pump used in this study (ranging between 54 and 78 cycles/min depending on the set level of vacuum [ 20]).
Differences were noted with vacuum drop between Vsystem and claw vacuum depending on the liner venting system, with short milk tube vented liners having the greater vacuum drop than mouthpiece chamber vented liners.
Depending on the deposition system used, vacuum-based deposition methods such as e-beam or thermal evaporation of metal electrodes has resulted in the performance deterioration, due to damages on the fragile organic surface by highly energetic particles such as intensive short-wavelength radiation, secondary electrons, etc.
(The Roomba, which is manufactured by the iRobot Corporation of Burlington, Mass., sells for $200 to $250 depending on the model; the Karcher Robo Vacuum Cleaner, made by a German company, costs $1,495 at www.frontgate.com).com
The latter irreversibly phase transform into α-(Al1-xCrx)2O3 Al1-xCrx 2O3and Al1-xCrx 2O3ch either proceeds via a γ- or θ-structured intermediate stage depending on the annealing environment (i.e., vacuum or flowing O2).
The concentration of the DNA stock was adjusted to 12 ng/μl using reduced EDTA TE buffer (10 mM Tris-HCl, 0.1 mM disodium EDTA, pH 8) or by vacuum evaporation depending on the starting concentration.
The entire dehydration and infiltration process usually required 2 weeks; the nondecalcifed specimens of infiltration step was performed under vacuum chamber systems depending on the size and substance of the tissue and whether infiltration was performed under a vacuum.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com