Sentence examples for dependence of the plate from inspiring English sources
A retention factor dependence of the plate height being different from that derived from the general rate model was proposed to accommodate general flow conditions.
4OHT-induced HR in each cell line showed a modest dependence on the plating density of cells (Figure 2D).
It was shown that transmission of sound pressure through a steel plate showed high dependence of the thickness of the plate to the frequency of the sound wave (thickness ratio).
The equations model the general behavior of finite plates well and explain the dependence of plate energetics on frequency and damping.
Non-linear terms that represent the coupling between the rotary inertia and the initial curvature are identified and their dependence on the finite rotation of the plate is demonstrated.
The results indicate that, depending on the boundary conditions, the deflections and frequencies of the plate have a dramatic dependence on the residual surface stress and surface elasticity of the plates.
Finally, the dependence of the LDMOS capacitances on the field plate configuration is also studied.
Figure 4 shows the dependence of the PIV on the quarter-wave plate rotation angle φ at the incident angle α = 45° and the laser pulse energy of 0.68 mJ.
At α = 45°, the peak amplitude of the PIV (see Fig. 4) is well approximated by the following function: Fig. 4 Dependence of the PIV on the quarter-wave plate rotation angle φ at α = 45° and laser pulse energy of 0.68 mJ.
The results showed that the characteristics of changes in efficiency, expressed as the dependence of the height equivalent to a theoretical plate (HETP) on average flow velocity of the mobile phase (u), are similar to those reported for classical columns containing stationary phase.
