Sentence examples for density tests were carried from inspiring English sources

Workability and bulk density tests were carried out on fresh concrete, while compressive strength, splitting tensile strength and modulus of elasticity tests were performed to evaluate some relevant properties of concrete in the hardened state.

The density test was carried out according to the standardized procedure from ASTM D1298.

Bulk density test was carried out by taking 10 g of soil sample that was oven-dried at 105°C, slowly poured into a measuring cylinder, and gently tapped for compaction (expressed in g cm-3) (Radojevic and Bashkin 2006).

A series of experiments, including density, compression, uniaxial tension and panel bending tests were carried out to characterize the mechanical properties of the composite.

In order to reveal effects of relative density on mechanical behavior, the out-of-plane compressive tests were carried out on composite sandwich structures with different relative densities, varying from 5.34% to 10.53%.

Firstly, disinfection tests were carried on at different current density.

Bulk density, Young's modulus, Vickers hardness and fracture toughness tests were carried out on the sintered samples.

Rotating bending fatigue tests were carried out on a high density Fe 2%Ni based powder metallurgy steel at 50 Hz frequency and at room temperature.

Soil tests were carried out in natural water content and density.

Drop weight tests were carried out involving different impact energy, foam density and stacking sequences.

Several tests were carried out at different curing ages: thermogravimetry, density, water absorption, ultrasonic pulse velocity and mechanical strengths.