Sentence examples for density of the specimen from inspiring English sources

The density of the specimen decreases rapidly during the drying process.

The saturated surface dry (SSD) density of the specimen determined at the age of 10- and 28-day is shown in Table 4 along with other mechanical properties.

where W is the weight loss (mg), D is the density of the specimen (g cm−3), A is the area of the specimen (cm2), and T is the exposure time (h).

The corrosion current density of the specimen coated in the presence of 3 g L− 1 KMnO4 was ~ 3 times lower than that observed for the specimen coated in the base electrolyte.

We observed a strong positive correlation between compressive strength and apparent density of the specimen (P < 0.0001; r = 0.75).

The test was positive if the ratio between the optical density of the specimen and the mean optical density of the control was 1 or more.

The apparent density of the specimens is about 94%to95%5% of the corresponding X-ray densities.

The results show that the volume change, saturation and dry density of the specimens vary nonlinearly with the ambient temperature and are affected by the exposure time.

The results of this study indicate a relationship between the charring rate and density of the specimens, with higher density Dark Red Meranti showing lower charring rate compared to the lower density Spruce specimens.

It is found that the fracture strain energy density of the specimens with the rotated angle between the fibers of the layers about 60° exhibits the maximum value, which is close to the angle of the two second-order lamellae of the conch shell.

The density of the specimens was calculated from their dimension and weight.