Sentence examples for density of the cell from inspiring English sources

This aids in boosting the current density of the cell by 27% at 0.57 V operations.

The measured power density of the cell at 0.5 V was 0.7 W cm−2 at 850 °C.

Maximum power density of the cell in active condition and at 60 °C was 170 mW/cm2 and in passive condition was 85 mW/cm2.

Increasing the energy density of the cell improves its utility, but it also increases the waste heat and maximum potential uncontrolled energy release.

The gas diffusion determines the limiting current density of the cell where a higher concentration drop of hydrogen results in a lower limiting current density.

By employing the HABP as an anode plate, the maximum power density of the cell is 194.3 mW cm−2 higher than that with a conventional solid plate.

In order to increase the reproducibility of the results, the density of the cells used was always 105 per experiment for every cell type.

Moreover, the maximum power density of the cells was also increased 72% in this manner.

The seeding density of the cells was 3 × 103 cells/well in a 96-well culture plate, 2 × 104 cells/well in a 24-well culture plate and 1 × 106 cells/well in a 6-well culture plate.

Optical density of the cells was measured at 600 nm.

The cells grown with chlorhexidine show the least density of the cells.