Sentence examples for density difference between the from inspiring English sources

Using two types of particles having different characteristics (ds=4 mm, ρs=920 kg m-3, and ds=0.175 mm and ρs=690 kg m-3, respectively) allowed us to observe two different expansion mechanisms: a pseudo-fluidized state promoted by the density difference between the solid and the surrounding gas liquid mixture, and a fluidized state due to the liquid circulation induced by the rise of the bubbles.

If high-latitude rainfall increases, more freshwater on the polar ocean's surface may mean a higher density difference between the surface and deep waters, leading to less mixing.

(iv) The density difference between the background of the phantom and an added test object, used to assess image contrast, shall be measured and shall not vary by more than ±0.05 from the established operating level.

Particularly, the dynamic responses of a riser will be larger with ISW amplitude augmentation, and larger with an increase in the density difference between the two seawater layers.

The results show that due to the density difference between the two fluids, asymmetric pair of Dean vortices are formed as the fluids pass through the curve.

It was shown that the required flow velocities increase with the permeability of the porous medium and the initial density difference between the aqueous phase and the DNAPL.

However, the viscosity and density differences between the injected and displaced fluids can lead to low sweep efficiency.

Most of the findings and interpretations are based on scattering experiments, which test small density differences between the assumed precursors of the crystals and the surrounding melt.

The performed experiments demonstrate that the residence time distribution is considerably affected by density differences between the tracer and carrier gas, particularly at elevated pressures.

Our observations show that small density differences between the tracer and bulk fluid can significantly modify the expected concentration profiles for unbaffled tubes.

During as well as after injection of CO2 into an aquifer, CO2 migrates towards the top of the formation due to density differences between the formation brine and the injected CO2.