Sentence examples for dense thickness from inspiring English sources

The absolute dense volume (cm) is calculated by integrating the dense thickness at each pixel over the whole mammogram, and the total breast volume (cm) is obtained by multiplying the breast area by breast thickness, with an appropriate correction at the breast edge.

The absolute dense volume (cm) is measured by integrating the dense thickness at each pixel over the whole mammogram, and the total breast volume (cm) is derived by multiplying the breast area by the recorded breast thickness with an appropriate correction for the breast edge.

The kinetic modification to a constant oxidation rate was observed to be correlated to the increase of the dense layer thickness.

At temperatures above 1173 K, a substantially improved performance was observed for asymmetric self-supported composite membranes with the dense layer thickness of 0.12 mm, surface-modified with (SrFeO3 − δ 0.7(SrAl2O4 0.3 Pt mixture.

The optimum rheological properties to fabricate Torlon® 4000T-MV/NMP 4000T-MV/NMPs appear at about 48–50 °C, and thollowultant fibers happear O2/N2 selectivity of 8.37 atd aboutparent dense layer thickness of 781 Å.

The decrease of the dense layer thickness can lead to increase the internal stresses in the membrane due to the chemical expansion of membrane material under a large gradient of oxygen partial pressure.

Fibers spun from dopes containing other additives have the optimal O2/N2 selectivity varying from 7.69 to 9.97 at 25 ± 2 °C, and the dense layer thickness varying from 500 Å to 2000 Å.

Simulations under industrial relevant operation conditions were conducted to investigate process performance as a function of membrane characteristics, i.e. membrane dense layer thickness, selectivity and the micro-porous support mass-transfer coefficient.

A parametric study on the influence of dense membrane thickness and water permeability shows that a two fold increase in water flux, without significant impact on energy efficiency, is potentially achievable with thin and permeable dense materials compared to microporous membranes.

Second, the dense layer thickness of the PVA/PAN composite membrane is only 2 μm which reduces the resistance to the mass transfer of the water molecule.

Note that, the graphene oxide/polyacrylonitrile composite membrane with the thinnest dense layer thickness of 0.1 μm has the highest water flux of 65.1 L/(m2 h).