Sentence examples for delay operating from inspiring English sources

Under optimal processing conditions we realized complementary 19-stage ring oscillators with 10 μs stage delay operating at 20 V.

The extension into longer delay operating ranges is evident, and the BER performance for this achieves the same level as the conventional technique when the larger bursts are compared.

This includes compensating for thermo mass changes in system, dealing with unknown and variable delays, operating at different temperature setpoint without retuning etc.

We also report the characterization of a gas sensor based on electro-acoustic delay lines operating at 78.8 MHz and featuring a maximum SAW amplitude of 0.6 nm due to 33 dBm burst excitation.

It is well established that delay in operating on abdominal emergencies increases mortality (Monod-Broca 1990).

Delay in operating renders the replacement of the fragments more difficult because the shortened soft parts or ties become rapidly less extensible and a correspondingly greater force is required to stretch them.

However, it has been shown in previous work that more than propagation delay, other components like operating system delay can contribute significant errors in synchronization.

The oscillators with a delay line operate at their fundamental frequencies, f 1 (reference part) and f 2 (sensing part).

Circuits display temperature variation insensitive propagation delay when operated at a supply voltage 44 47% lower than the nominal supply voltage (VDD= 1.8V) in a 180 nm CMOS technology.

When it receives the interrupt from the sparking signal that indicates that the ignition spark started, it eventually waits for a time equivalent to the cut_off delay and operates the ignition spark cut.

If the fault current rises above the breaker limit within the operating delay of the communication based scheme (direction detection time + communication delay + breaker operating time), the value of the terminal inductors of the line need to be increased or the safety margin of "High-setting" of the local measurement based schemes need to be decreased.