The main disadvantage is the need for an appropriate degree of fill-in for the preconditioner which turns out to be problem dependent and must be found empirically.
The automated evaluation has already been implemented within the software for determining the degree of filling of the seam bond.
Of particular interest in the uncured adhesive condition is the degree of filling in the areas a, b, c and d (see Fig. 1, left).
The texture features evaluated include total porosity, pore size distribution MIP, capillary water absorption, vacuum absorption, and the degree of filling the pores with water.
The capillary water absorption in combination with the degree of filling the pores can be an effective durability indicator for use in the classification of rock construction products.
The strong Raman line around 1850 cm−1 was used to characterize the degree of filling as well as their structural stability under high temperature thermal treatments.
Figure 11 shows the result of the ultrasonic examination for determining the degree of filling of seam loop C. Influences due to a deviation of the seam loop position in the sensor can be excluded because of the good coupling.
After finding the best filling method, we tuned the morphology of filling particles, degree of filling and sample purity, in terms of coating-to-filling-ratio, by variation of the reaction parameters.
The second alternative was to gradually fill the notches between the protrusions, in which case we studied the effects of the protrusion height, degree of filling, and two modes of alignment.
Therefore the model for transverse diffusion for non-crimped fabrics was found to be a function of the thermal properties of the constituent materials, the fibre volume fraction, the degree of filling and the Peclet number.
