Sentence examples for degree of conversion for from inspiring English sources
Reactions in general proceed with high degree of conversion for most substrates by just prolonging the reaction time, though at lower rate than with Au/TiO2 [8].
The times of electrolysis to a given final degree of conversion for the two modes of operation of a given reactor are calculated and compared.
Comparison of crosslinking reaction of a hydroxylated PVC polymer synthesized in our laboratory and a commercial system shows a higher reaction rate and degree of conversion for the former.
The degree of conversion for inverse spinel, x, which identifies its formula Fe(III)xCo II 1 x[Co II)xFe(III 2 x]O4 (brackets indicate ions at Oh-site), can be calculated on the basis of the relative contribution of individual Td- and Oh-site sextets.
In contrast to TZ-PIMs, the MTZ-PIMs had distinctly improved solubility characteristics, enabling a more detailed investigation of the degree of conversion for the cycloaddition reaction and the structures of TZ-PIMs, which showed the presence of two kinds of tetrazole rings.
Table 2 DC mean values and standard deviation Resins MV /SD St* TR 24.6 (±4.67) E OB 39 (±1.96) D VF 44.3 (±1.03) C OF 53 (±4.53) A OS 52.5 (±1.01) AB St* Similar letters are not are not significantly different (p > 0.05) Fig. 2 Mean and standard deviation for degree of conversion of 5 orthodontic resins.
The role of preheating of gaseous mixture in fluidized bed prior to its ignition inside bubbles was identified as important factor for increase the degree of conversion of DCM and MCB in low bed temperature, in comparison to similar process in the tubular reactor.
The process affords high degree of conversion of polyol to cyclic carbonates and provides a potentially attractive synthetic route for monomers of polycarbonates and polyurethanes.
The degree of conversion of the inhibitor molecules is an important parameter during consideration of the MFCs for application in biorefinery recycle water clean-up.
Figure 1 Degree of conversion of the resin bonds evaluated.
These condition occurs above 900°C causing the degree of conversion of chlorine compounds of 92-10092-100%
