Sentence examples for deformation of the prototype from inspiring English sources

Normally, a designer builds a support in this stage to limit the further bending and deformation of the prototype.

Considering the simplifications adopted in the construction of the phase 2 geometry, particularly the neglecting the localized deformation of the prototype and the use of a unique mean value of rotational stiffness for all the beams, the matching of the FEM static model with the experienced data can be viewed as acceptable.

Our approach uses a generic facial motion model which represents deformations of the prototype face during speech.

Fig. 3 Cross-section image of control valve prototype Fig. 4 FEM result of deformation mode of the prototype Fig. 5 Components of prototype Fig. 6 Assembled prototype.

Figure 27 shows that the bending deformation of the RDMS prototype reconstructed by the measurement system respectively, which shows good consistency.

In a series of static model tests, lateral cyclic displacements, caused by the seasonal thermal deformation of the girders with prototypes, were applied to the top of a small abutment model.

Another distinct point of the prototype is its foot deformation.

In this phase, the selection started from a visual analysis of the prototype and neglected local deformations.

Base on the R&D experiences, we designed a special tooling of the prototype box which can be used to control the deformation during the welding process.

A large deformation implementation of the direct stiffness method is shown to provide good prediction of the stiffness properties of the prototype truss.

Laboratory testing of the prototype package shows that the finite element predictions of damage are excellent though the back face deformations are under predicted.