Sentence examples for deformation amplitude from inspiring English sources

Results showed that the effect of the addition is variable, depending on the amount, type of pentosans and deformation amplitude.

Moreover, the oscillating electrical response depends clearly on the deformation amplitude applied.

The instrument transfer function (ITF) is obtained by actuating the AM with different spatial frequencies fx and measuring the deformation amplitude.

According to the changing trend of deformation amplitude with diameters of indium bump, and employing element pitches normalization method, a design rule of indium bump is proposed.

For the segmented polyurethanes have isolated hard-segment domains the shape recovery decreased when the deformation amplitude increased from 50% to 200% and stopped decreasing as deformation amplitude increased to 250%.

The deformation amplitude was 1.3 millistrain in the crack initiation site and loading frequency was around 80 Hz.

Dynamic nanomechanical properties of bovine bone marrow stromal cells (BMSCs) and their newly synthesized cartilage-like matrices were studied at nanometer scale deformation amplitudes.

Characteristic variables at tearing onset or final stable states: a current sheet half-thickness L z, and b b=B z m i n /B 0, for various mass ratios and deformation amplitudes, a=7.5 (yellow), a=5 (red), a=3.33 (blue), a=2.5 (green), and a=1.25 (purple).

Based on this identification, onset parameters were determined, shown in Fig. 2 as function of the mass ratio for different deformation amplitudes a: (a) the current sheet half-thickness L z at the location of the minimum of B z, (b) the normal magnetic field b=B z m i n /B 0. Vertical bars correspond to unstable cases with onset times and locations identified as described above.

True values of the logarithmic decrement (LD) for copper were calculated from LD amplitude dependences, measured for the coating substrate system in the range of coating deformation amplitudes 5 × 10−5 < ε < 10−3 at bending vibrations of 140 150 Hz of cantilever specimens.

It is shown that with the reduction of the twin domain thickness to the nanosize range, the copper damping characteristics undergo a qualitative change, which is expressed in an abrupt weakening of the amplitude dependence of LD and in a considerable increase in LD values at its heating in the entire range of deformation amplitudes.