Your English writing platform
Discover LudwigSuggestions(1)
"deformation about" is not a grammatically correct phrase
It is unclear what the intended meaning is. Some possible alternatives could be: - Deformation caused by For example: The deformation caused by the weight of the car on the bridge was concerning. - Deformation due to For example: The deformation due to the heavy winds was noticeable. - Deformation in regards to For example: There were many theories about the deformation in regards to the ancient wall's structure. - Deformation caused by changes in For example: The deformation caused by changes in temperature was unexpected.
Exact(9)
In a way that for the specimen CB200 at axial deformation about 10 mm, this increment is about 50%, and at axial deformation about 60 mm, this increment is about 100%.
The significant point is that, at square CFT columns, load buckling occurs on the steel shell at axial deformation about 28 mm.
Five 100 mm LVDTs were used in order to measure the lateral deformation about the minor axis as depicted in Fig. 3.
An increase in the weak-zone viscosity (Additional file 1: Figure S12a) by a factor of 5 produces surface deformation about two times smaller.
During cold deformation, about 10% of the energy spent is stored in the polycrystalline material in the form of the elastic energy associated to crystal defects.
The Ni P/Ni/Vit.1 pillars have the largest engineering plastic strain of 21.3±1.0% for the "uniform plastic deformation", about 11.2 times of 1.9% of the bare Vit.1 pillars.
Similar(51)
34 fringes in this image equates to a peak ground deformation of about 1m.
Increasing the end eccentricities to be 30 mm (S-3-3) resulted in increased lateral deformation by about 0.06b.
Increasing the end eccentricities further to 50 mm (S-5-5) resulted in increased lateral deformation by about 0.12b.
It can be noted that inspite the column C-0-0 was consider as short column it exhibited slight lateral deformation of about 0.03b.
The experimental results indicated that the inclusion of one geogrid sheet placed at the base of course layer reduced the vertical deformation by about 18 to 64% depending on the base course layer thickness.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com