Sentence examples for deflection ratio from inspiring English sources

The deflection ratio of RSHCCP was greater than the minimum deflection ratio level (i.e. 3%) of semi-rigid pipe.

In particular, the guideway deflection ratio is the most influential parameter which governs the air gap.

Results show that RSHCCP had the highest load-carrying capacity and deflection ratio among them.

This method helped us to estimate deflection ratio as a mathematical function of the main process planning parameters.

This was used for the estimation of the deflection ratio, which was a mathematical function of the main process planning parameters.

Thus, the higher the reinforcement ratio and the lower the compressive strength were, the higher the total-to-instantaneous deflection ratio was.

In particular, the effect that key parameters have on deflection ratios and horizontal strains are investigated.

Using a structural analysis, parameters representing the stiffness of the frames in reducing deflection ratios and horizontal strains were derived.

This makes it possible to estimate building modification factors from the relevant design charts so that induced deflection ratios and horizontal strains, caused by adjacent excavation and tunnelling activities, can be calculated.

Although PSCC has a low modulus of elasticity, the moment capacity and the deflection of singly reinforced PSCC beams are acceptable as the span-deflection ratio satisfies the allowable limit provided by BS 8110.

It was found that although palm oil clinker concrete (POCC) has a low modulus of elasticity, the test results revealed that the deflection of singly reinforced POCC beams, with reinforcement ratio less than 0.524, under the design service load is acceptable as the span-deflection ratios range between 250 and 257 and these values are within the allowable limit provided by BS 8110.