Tanimura et al. (2003), for instance, found that the use of expansive additive and shrinkage reducing agent produced an increase of flexural cracking load and a reduction of deflection for the same load condition, thus indicating an increase of flexural stiffness of the RC beam.
Keep your elbows locked and your angle of deflection the same, but let your shoulders dip to absorb some of the power of the shot.
The third model is also a frame without slabs, but a modified load distribution is used, derived to obtain the same beam deflection and the same magnitude of shear forces calculated in the so-called "exact" model, resulting in the definition of a specific load distribution for each beam.
The magnitude of deflection of the piles was not the same as the field test due possibly to the variability of soil properties.
This will increase the power consumption and maximum deflection of the lifters, but at the same time increase the production of <45 μm material, the grindability and the pebbles consumption.
Studies in which adjacent whiskers are sequentially deflected also reveal strong suppression of responses to the second whisker by prior deflection of the first [20], [24] [26], and the same has recently been demonstrated for stimuli that involve many whiskers [27], [28].
We also considered the same initial deflection of the haltere (50 µm) along the sensing direction in order to compare the force required with that in the actuation direction (direct comparison).
This method considers the influence that altering one part of the waveform (i.e., negative deflection PIII) will have on another part of the same waveform (i.e., positive deflection PII).
At the first glance, a surprising demand is posed: Design a radially heterogeneous polar orthotropic circular plate whose fundamental mode shape coalesces with the static deflection of a homogeneous circular plate of the same radius and thickness under uniformly distributed load.
The method is applied to rings supported against deflection and torsion in some bays of the same length located at equal angular intervals; the driving point impedance, transfer impedance and the distributions of the deflection, angular rotation, force and moment are calculated numerically, and the effects of the number, the stiffness and the length of supporting springs on them are studied.
