Sentence examples for deflection length from inspiring English sources

The test results show that the maximum deflection length along the vertical direction of the mirror plate is 2 μm, while the rotation angle about X- and Y-axis are ±2.3° and ±1.45°, respectively.

(a) Schematic experimental view, (b) experimental circuit, (c) experimental view, and (d) relation between deflection length on screen and current for this system.

The schematic experimental system is presented in Figure 6, which is composed of schematic experimental view (a), experimental circuit (b), experimental view (c), and calibration line between deflection length on screen and current for this system (d).

The first case has been evaluated numerically, where the influence of the liquid surface tension parameter, the elasticity parameter of the shell, its axial deflection wave length l and the thickness of the layer have been determined.

The horizontal curve properties include radius of curve, deflection angle, length of curve, and superelevation.

Amongst the various variations in position, amount of deflection, height, length, and width of T-loop in a study by Chaudary et al. [22] in 2013, the biomechanical properties of T-loop of height 7 mm made of 0.017 × 0.025 TMA placed in the center of extraction space showed variable results in terms of force and M/F ratio.

The current Dutch consensus guideline leads to too many referrals, mainly due to the deflection of length during the first 3 years of life.

This child had a deflection of length before the age of 1 year and was diagnosed with transient growth retardation due to dyspepsia.

We have confirmed that the current Dutch consensus guideline would lead to too many referrals, mainly due to the deflection of length during the first 3 years of life.

Using simulations, this new sensor is designed and its ability to evaluate contact stresses is discussed as a function of rolling conditions: influences of roll thermal stresses, roll deflection, roll strip contact length, distance of measurement points to roll surface on contact stress reconstruction by inverse analysis are characterised.

The analytical model estimates the crack opening along a simple deflected crack path, defined by a crack deflection angle and length, and residual shear at each asperity interfering with this opening to generate closure.