Your English writing platform
Discover LudwigSuggestions(1)
Exact(1)
The main requirements of this design problem are to determine: the maximum compressive stress in the structure while the bridge is being opened, the maximum deflection in the structure, and the factor of safety of the new design for example, the fatigue life could be predicted.
Similar(59)
The multi-objective self-repair procedure provides damage tolerance minimizing both maximum deflections in the structure and stresses in the structural members.
Figure 5, which is obtained through an ANSYS simulation, shows the deflections in the structure.
Fig. 5 The deflection in the robot's structure due to its weight when loitering on a vertical surface, a the un-deflected structure, and b the deflected structure.
In this study, we consider a class of nonlinear aeroelastic stability problems, where geometric nonlinearities arising from large deflections and rotations in the structure interact with aerodynamic nonlinearities caused by moving shocks.
The results show that increasing the CNTs volume percent, the dynamic deflection decreases while considering the CNTs agglomeration leads to increase in the dynamic deflection of the structure.
The initial stress defines the initial deflection of the structure while the Pd-hydriding induces compressive stress variation in the Pd actuator layer and therefore the membrane deflection.
In 2009, K.A. Zalka indicated that the interaction between the bending and shear modes is always beneficial, so that it reduces the deflection of the structure (Zalka 2009).
Starting about 1910, however, engineers began to recognize that concrete dams are monolithic three-dimensional structures in which the distribution of stress and the deflections of individual points depend on stresses and deflections of many other points in the structure.
The effect of the SMA wires on contact force history, deflection, in-plane strains and stresses of the structure was studied.
Strain and deflection data indicated that minimal stress levels existed in the structure during testing.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com