Sentence examples for deflection difference from inspiring English sources

For the shortest cantilever length 2L (RB2), the deflection difference according to the pretension slightly increased.

The deflection difference between G2 and G1 tended to decrease as the PS force increased.

In its definition, bed separation is also expressed by the deflection difference of the two contiguous strata.

For the two-girder bridge, the yield and failure loads were approximately 2500 and 2800 kN, respectively, where the maximum deflection difference between G1 and G2 was 3 mm.

Its high tensile strength and deflection difference from the underlying weak strata allow bed separations to form close to the goaf area, within the caving zone and fissure zone, or away from the goaf area, in the bending zone (Fig. 1).

The deflection results shown in Fig. 21b verify that the deflection difference between G1 and G2 was minor due to the effective stress transfer by the cross beams and the structural continuity between the girders, the cross beams, and the deck.

Deflection differences at the loaded edge between uncracked and cracked shaft are used for the computation of the local flexibilities.

Because of finite stiffness of grinding system, grinding force will cause the tool deflection (the difference between actual cutting depth and nominal cutting depth).

In this work, the impact of the spacer features (interpillar distance and shape) on the membrane deflection, pressure difference across the membrane, and mass transfer was studied for a flat membrane microcontactor.

The few lame attempts at deeper connection with him ("What happened when you were a kid?") were met with brusque deflection ("What difference does it make?").

vMMN was defined as any negative deflection of the difference waveform following the P1 response that lasted for the necessary consecutive time-points.