Sentence examples for deflection along the from inspiring English sources
Variation of deflection along the thickness has been considered as the result of three-dimensional analysis.
The three-order crossed-lamellar architecture interlocks cracks via crack deflection along the interfaces in a three-dimensional manner, thus confining the damage in a small region.
Images of cracks identify growth through the outer layer, then deflection along the interface before growing and arresting in the inner layer.
Generally, adding alignment spacers tends to reduce the deflection along the specimen, and decrease the bending moment at the overlap edge.
The output power and the starting time were calculated by the blade-element momentum theory and the simple beam theory was employed to compute the stress and deflection along the blade.
J mathematically equals the sum of the maximum second moment of area (Imax) and minimum second moment of area (Imin) that quantify resistance against deflection along the respective orthogonal major and minor principal axes (Supplementary Fig. 2) through the relative distribution of matter12.
Performance of specimen is evaluated on the basis of ultimate load carrying capacity, maximum deflection and deflection measured along the span of the beam.
It is a demanding and time-consuming task to construct the side window mechanism of a car such that the deflections along the seals are minimized.
The Genetic Algorithm (GA), as a global search technique, is utilized to optimize shapes of post-tensioning functions to achieve minimum vertical deflections along the bridge deck.
The static and dynamic deflections along the spindle shaft as well as contact forces on the bearings can be predicted with simulated cutting forces before physically building and testing the spindles.
The proposed model predicts bearing stiffness, mode shapes, frequency response function (FRF), static and dynamic deflections along the cutter and spindle shaft, as well as contact forces on the bearings with simulated cutting forces before physically building and testing the spindles.
