Sentence examples for defined optimum from inspiring English sources
Operating within the defined optimum window of operation resulted in both enhanced performance and robustness for the oxidation step in the piloting and manufacturing campaigns.
For both valve designs, the previously defined optimum orientation with respect to pressure gradients and turbulence demonstrated the highest left anterior descending flow rates.
A very well defined optimum partition of the two catalysts is predicted and found in excellent agreement with the typical optimum determined from pilot plant experiments, and further implemented in commercial plants.
Under the defined optimum conditions, the calibration curves were linear over the concentration range of 40 470 μg L− 1 and 55 500 μg L− 1 for Cr III) and total Cr, respectively.
The statistically defined optimum formulation was: 70%volcanic material-10material-10%Anhydrite-20Anhydrite-20ring 22 h at 60 °curing at 22 °C; the predicted atd confirmed 28-day strength was 20.2–20.60 °C; opthenm conditions ate discussed for other ages.
It is also shown that for small values of this ratio the optimum coupling efficiency and a corresponding suitably defined optimum design parameter are functions of the fiber normalized frequency only and they do not depend separately on the wavelength, the fiber core radius or the fiber numerical aperture.
The study of cost per foot is useful in defining optimum, minimum cost drilling condition.
The studies permitted to define optimum variables of precipitation of highly dispersed iron III) silicate from sodium metasilicate solution using salt solution.
We propose a scheme to define optimum design domains of LED-based luminaires for a given light output requirement by taking cost, energy consumption and reliability into consideration.
In order to meet increasing demand, it is important to define optimum conditions that can increase volumes and quality of oil produced.
A device model has been derived to define optimum SDA plate design for any fabrication process based only on material properties and geometry.
