Sentence examples for defect depth from inspiring English sources

Two coils are used in transmission mode, which allows the usage of frequency-based measurement of the defect depth.

The pipeline remaining life can be prolonged greatly by reducing mean value of corrosion defect depth and radial corrosion rate.

Additional frequency component was observed at the delamination location and at the resonant frequency relating to the defect depth.

This study shows that the flanging height does not influence significantly the surface defect geometry whereas the flanging radius and the corner radius modify the defect depth.

Firstly, the influence of LWT geometries was analyzed, which indicated that relative defect depth was the most significant factor to ultimate creep load.

Although reflection measurements also give information about defect depth, reflection measurements from only one side are not sufficient for assessing the whole cross section of the specimens.

The results show that the corrosion defect depth and radial corrosion rate are the key factors influencing pipeline failure probability and remaining life.

Numerous studies have been performed considering global heating (a quite large surface of the investigated composite material is heated and defect depth or size can be detected).

The fracture mechanics analysis predicts the fatigue performance of the specimens and finds it to be most sensitive to variations in the residual stresses and initial defect depth.

The test group showed a mean bone loss of 0.77 mm ± 0.42 SD/0.57 mm ± 0.44 SD (defect depth/defect width) on the mesial side and 0.82 mm ± 0.42 SD/0.62 mm ± 0.36 SD (defect depth/defect width) on the distal side.

In the control group, a mean bone loss of 0.72 mm ± 0.61 SD/0.51 mm ± 0.48 mm (defect depth/defect width) on the mesial side and 0.82 mm ± 0.77 SD/0.57 mm ± 0.58 SD (defect depth/defect width) on the distal side was measured.