Sentence examples for deep drawings from inspiring English sources

In order to validate this method, deep drawings of a square cup, a clover shaped cup and an L-shaped cup have been chosen as the examples.

This paper investigates the variation and effects of punch and die geometry, blank-holding pressure, top-ram pressure, lubrication, and drawing speed in the deep-drawing of C.R.1 steel cups of 0.9 mm thickness.

In this study, the algorithm was applied to fuzzy adaptive control of the blank holding force (BHF) in the circular-cup deep-drawing process in order to improve the limit drawing ratio (LDR), which is a typical industrial requirement.

In this study, to verify the validity of the FE model of surface roughness in the micro-deep-drawing process, a new high-precision sequential blanking and drawing setup was developed for the experiment and a microcup with 500 μm diameter was fabricated from stainless steel (SUS304) ultrathin foil of 20 μm thickness.

Hydraulic deep-drawing experiment on 1.00-mm-thick 08Al steel was conducted, and a drawing ratio of 2.63 was obtained.

Since it is thinning that leads to early fracture, this plastic anisotropy imparts better deep-drawing properties to sheet material with the optimum grain orientation.

Sometimes the final pass in hot-rolling generates specific surface patterns for example, the protrusions on reinforcing bars or floor plates and in cold-rolling a specific surface roughness is rolled into the strip at the temper mill to improve the deep-drawing operation and to assure a good surface finish on the final product for instance, on the roof of an automobile.

Especially deep-drawing tools are of high economic relevance.

The corrosion distribution along a coil-coating sample formed by deep-drawing is reported.

The results from deep-drawing tests with uncoated dies show that HIGTO(I) itself is not able to replace chlorous deep-drawing oils.

This paper focused on forming defects (fracture and wrinkle) in the two-stage deep-drawing.