Sentence examples for deduced temperature from inspiring English sources

In the case of the heat treatments, all TDT curves showed a log-linear profile from which z values were deduced (temperature increase for reducing the treatment time 10-fold) at 4.7°C, 4.2°C, 10.8°C, and 11.8°C for E. coli, Salmonella Typhimurium, L. monocytogenes, and S. aureus, respectively.

At all temperature ranges, the effect of time on the yield is the same: high at 50 and 60 min, while low at 55 min. It can be deduced that temperature had a slight effect on biodiesel yield, with the lowest temperature having the highest yield.

When studying smoke/mist interactions using a nozzle injecting water in the corridor, a perfect mixing was deduced from temperature measurements, while some discrepancies still appeared with the opacimeters, indicating some variations in the particle concentrations.

This is the temperature region in which depolymerization occurs, as deduced from temperature-resolved X-ray diffractometry.

Optimal primer annealing temperatures were deduced using the temperature gradient function of an iCycler (Bio-Rad) over 35 cycles.

If we just consider the 1hh-1e transition, by contrasting the value of ACPGE current with that of AHE current at different temperatures, we can further deduce the temperature dependence of (frac {D_{s}}{mu _{s}}).

Moreover, deduced ignition temperatures increased with increasing coal rank and decreased with increasing oxygen concentrations.

The latter require proper barrier design to minimize carrier loss by non-radiative recombination (NRR) mechanisms which can be deduced from temperature-dependent PL measurements.

The rate coefficient for propagation, kp, is deduced for temperatures from 20 to 90 °C via the pulsed laser polymerization size exclusion chromatography (PLP SEC) method at pulse repetition rates between 1 and 10 Hz.

We evaluate the temperature elevation in two steps, as we calibrate the gate resistance over temperature with the transistor at off state at a first stage, and then we deduce the temperature elevation through gate resistance measurements.

This article being based on different building structures deduces indoor temperature distribution.