Sentence examples for dedicated holder from inspiring English sources

A dedicated holder was designed to fabricate nanowire coating on the interior surface of the evaporator section.

In the MR scanner, each animal was installed in a dedicated holder that allowed rigid translation and rotation of the animal body within the MR scanner, without touching the animal.

The US transducer was mounted in the arrangement shown in Figure 1 using a dedicated holder which was inserted, via a vertical rod, into a mounting platform which had been built specifically to sit on the head coil, as shown in Figure 2.

Before introducing the thermalization insert, the dedicated sample holder is lifted above the liquid helium bath, about 10 cm away from the magnet isocentre.

The ultraviolet-irradiated beads were placed inside a 0.4 ml polytetrafluoroethylene (PTFE) sample cup attached to the end of a dedicated sample holder insert made of fiberglass and then loaded inside a 7 T custom-designed polarizer prefilled with liquid helium (a full description of the DNP polarizer can be found in the original publications)36,37.

177Lu vials were put at the bottom of the dedicated syringe holder raised at 3 cm relative to its normal position in order to place the vials closer to the area of highest sensitivity.

Tilt angle series were acquired using a FEI Tecnai Osiris electron microscope, operated at 120 kV, and a dedicated tomography holder (Fischione Instruments, model 2020).

TMS was delivered to the cranial region of interest using a Magstim 200 stimulator (Magstim Co., UK) via a 70 mm figure-of-eight shaped coil held in place by a dedicated coil holder.

It lacks a water bottle holder, a multitude of pockets and silly things like a dedicated cell phone holder.

EDS measurements were performed on a FEI Tecnai G2 electron microscope operated at 200 kV, using a dedicated low-background holder and Cu-free Mo TEM grids.

To verify the elemental concentrations determined, EDS measurements were also performed on a FEI Tecnai-20F microscope operating at 200 kV, using a dedicated low-background holder and Cu-free Al TEM grids.