The computed one-dimensional slip velocities decrease toward the top of the risers and increase with decreasing cross-sectional averaged voidages.
The mode volumes (red) decrease significantly from 0.15 to 0.0038 (λ/2n)3 with decreasing cross-sectional area from 2 × 104 to 3 × 102 nm2, where the mode volume decreases by a factor of 40.
Proton conductivity and permeability of methanol through the PEMs increased with increasing AMPS content, CAMPS, and with decreasing cross-linker concentration, CGA, because of the increase in the water content.
We show using in situ SEM and TEM tensile testing of sub-micron Al fibers prepared using selective etching of a eutectic alloy that multiplication of dislocations through intermittent spiral sources directly causes a power-law increase of the yield stress with decreasing cross-sectional size.
In contrast, it was found that the critical strains are all lower than their bulk counterparts, and that the critical strains decrease with decreasing cross-sectional dimensions; the lower strains may be an effect emanating from the presence of the surfaces, which are all more elastically compliant than the bulk and thus give rise to a more compliant flexural rigidity.
Population-level models quantifying the factors promoting the spread of resistant bacteria have been instrumental in identifying the preventive strategies most effective at decreasing cross-transmission between patients [9] [19].
Diaphragm muscle atrophy involved both slow and fast fiber types, decreasing cross-sectional areas by 57% and 53%, respectively.
For the HMA- co-HDDMA polymers, the amplitude development profile shifts to higher polymerization times with a decreasing cross-linker content.
Indeed the temporal incoherence ensures a good axial resolution, whereas the spatial incoherence increases the sensitivity by decreasing cross-talk effects.
(24) Decreasing cross-link density in the complex, whether in the PEMU or CoPEC morphology, provides for better dissipation of energy into the material.
