Your English writing platform
Discover LudwigSuggestions(4)
Exact(8)
In the same geometry, an increase in the dimensionless yield stress decreases the friction factor.
The experimental data demonstrate that such complex surface modification decreases the friction coefficient of VT1-0 titanium 1.3 times and increases its wear resistance more than 30 times.
The fluidic oscillator approach also decreases the friction losses in pipe networks and in nozzles/diffusers due to boundary layer disruption, so there is actually an energetic consumption savings in using this approach over steady flow.
Numerical results demonstrate that: (1) a large load often induces a large friction coefficient, (2) an increase in the surface roughness increases the friction coefficient both in mixed EHL and full film EHL, and (3) the rolling velocity decreases the friction coefficient in mixed EHL due to the increases in hydrodynamic effect and lubricant film thickness.
The applied duplex surface treatment combining the oxygen hardening with subsequent deposition of nc-WC/a-C coatings decreases the friction coefficient as well as essentially improves microhardness and wear resistance in dry sliding of the coated Ti 6Al 4V alloy.
The addition of nanographite decreases the friction coefficient and wear scar diameter by 44%and49%9%.
Similar(52)
Slight changes in air pressure, which cause corresponding water movement in the soil, can increase or decrease the friction between the material and the underlying rock, causing the slide to speed up or slow down.
Tribological experiments suggest that MLG can dramatically improve the wear resistance and decrease the friction coefficient of the NMCs.
The results indicated that the BNNSs can decrease the friction of bare silicon wafer.
On the one hand, it induces the formation of transfer film to decrease the friction coefficient of annealed PDC.
Layered hexagonal BN particle reduce the direct contact and severe adhesion between friction pairs, thus decreasing the friction coefficient.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com