Your English writing platform
Discover LudwigSuggestions(4)
Exact(9)
Solid inclusions increase the storage modulus more than the loss modulus, hence decrease the material damping.
This is susceptible to form various carbonates with different stability, thus affecting and potentially decrease the material degradation rate.
It was hypothesized that adding calcium phosphate to commercially pure titanium (CP-Ti) and Ti6Al4V alloy via laser processing would decrease the material loss when subjected to wear.
Polymerisation of 3,4-ethylenedioxythiophene (EDOT) at CCl based electrodes was performed in order to decrease the material pore size and decrease sorption.
Only when loading rates are sufficient to decrease the material shift factor by multiple orders of magnitude is the anticipated deformation induced mobility or "mobility increase with increased deformation" observed.
Additionally, an increase in cobalt content in Zn Co coatings tends to decrease the material's grain size, which may influence the anticorrosive performance of the coating.
Similar(51)
Therefore, increasing the number of horizontal intermediate bulkheads and decreasing the material conductivities, the best thermal efficiency is obtained.
The main issue with such techniques is metal adhesion on the abrasive tool, which decreases the material removal rate.
Methanol concentrations higher than 5.0 wt% decreased the material viscosity drastically, which should be taken into account when designing the diverting system.
The CNF coating reduced the filter porosity and decreased the material permeability, but the pressure drop during the gas passage through the reactor remained low for CNF fraction <10%.
This improvement in surface morphology indicates the formation of a protective layer on the steel surface which decreases the material degradation [40].
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com