Sentence examples for decrease of strain from inspiring English sources

Natural aging at room temperature induces an increase of modulus and yield stress, and a decrease of strain at break.

It is shown that these ideal orientations are meta-stable under rate-sensitive conditions, and their stability generally increases with the decrease of strain rate sensitivity.

The addition of Mn and Si caused both solid solution hardening at lower strain rates and a decrease of strain rate sensitivity of the flow stress.

It is shown that the decrease of strain rate at large strain and the elevation in temperature occurring at large driving velocity favor dynamic strain aging, reduce strain rate sensitivity and enhance strain localization.

This results in a considerable decrease of strain hardening at high strain levels (Fig. 5).

This could result in decrease of strain energy and increase of equivalent viscous damping.

An attempt has been made to qualitatively explain the observed decrease of densification strain with strain rate.

The decrease of compressive strain with increasing strain rate occurs because epoxy becomes more brittle as there is not sufficient time for the stress to be relieved.

As leaching grew, a loss of stiffness and strength were observed and an obvious decrease of peak strain was noted.

Normalized serration number presented a linear increasing tendency with the decrease of applied strain rates due to the reduction of free volumes.

As reported from some authors, the fatigue life seems enhance or reduce in the temperature domain where the DSA is maximum, but the decrease of the strain rate always decreases the number of cycles to failure.