Sentence examples for decrease of sheet from inspiring English sources
The sharp decrease of sheet resistance was observed for the thickness ca. 20 nm (two times higher than for annealed one).
Reduction at 1000 °C results in a decrease of sheet thickness to ∼0.5 nm without any morphological changes, and de-oxygenation (O/C ratio 5%) accompanied by enhancement in sp2-C to 84%.
Although the decreasing of sheet resistance seems to be saturated after 50 min, it is suspected that the sheet resistance of CNTF can be further decreased if the compression temperature increases.A possible mechanism for the enhanced conductivity of CNTF after the thermal compression is therefore proposed.
The sharp decrease of the sheet resistance was observed (RT and annealing) for the thicknesses above 10 nm when an electrically continuous layer is formed.
The threshold current density is significantly reduced by a factor of 2 due to a decrease of the sheet carrier density by a factor of only 1.6.
Annealing at up to 600 °C resulted in an increase of the mean grain size in the films, and a decrease of their sheet resistance.
The study of resistivity of the GO films by 4PP method shows that thermal heating of the samples in the temperature range from 100 to 200 °C (for 15 min) results in a decrease of the sheet resistance from 1013 to 106 Ω/sq (Fig. 5).
The optimum conditions for ion-beam-irradiated few-layer graphene (I-G) are 80 eV of beam energy and 1 s of irradiation time, which is confirmed by the decrease of the sheet resistance and increase of water contact angle with similar transmittance to pristine few-layer graphene.
Addition of oxomalonate induced a shift of the amide-I band of OAD toward higher wavenumbers, interpreted as a slight decrease of β sheet structures and a concomitant increase of α helix structures.
Both complexes showed a similar increase in α-helical content and a decrease of β-sheets of the BRCA1 RING proteins.
All the laminated TCEs, under 200 kg/cm2 at 120 °C, resulted in simultaneous decrease of transmittance and sheet resistance.
